Refreshing neck gaiter

This is the go-to choice for any outdoor activity. Do you run, walk, or cycle? The Jadecool works through evaporation: water and airflow activate the cooling of the polyester fabric enriched with jade microcrystals.

• Available in several colors: sky blue, gray, black, white, orange
• One size fits all
• Reusable indefinitely: just wet it again
• Built-in UV protection for the skin
• Activates in seconds

Do you wear a full-face motorcycle helmet? Do you work in a confined space? Evaporation doesn’t work without air. The PCM model is designed for this: its inserts absorb heat by melting and maintain a constant temperature of 21°C. Dry, constant coolness, without water or damp fabric.

This product works with water and airflow. Here’s how to activate it:

1. Soak the neck gaiter in water: hot, cold, lukewarm—it doesn’t matter
2. Gently wring it out by pressing without twisting
3. Wipe the surface with a dry cloth to remove excess water: the skin must not remain damp
4. Put it on. The cooling effect kicks in within seconds

The effect lasts for hours. As soon as the cooling neckband dries out, repeat the process: a water bottle, a water source, and you’re good to go. The product is infinitely reusable, lightweight, and easy to carry in your clothes or bag.

This product requires no water. No airflow is needed either. Activation is triggered by cold:

1. Place the neck strap in the freezer or refrigerator for at least 45 minutes
2. Position it directly on the back of your neck
3. As long as the material remains solid, the cooling effect stays constant at 21°C

No damp feeling, no wet fabric. The cooling is dry and direct. This is the neck cooler to choose when wearing a full-face helmet, a thick jacket, or PPE that blocks ventilation.

The Jadecool fabric contains micro-crystals embedded in its fibers. To prevent damage, follow these care instructions:

• Use a mild detergent without fabric softener or chemicals
• Hand washing is recommended, but machine washing at 30°C is possible
• Minimal spin cycle; do not wring out the product
• Air dry; do not tumble dry; do not iron
• No bleach or dry cleaning
• Never store the neck cooler while damp to prevent mold
• Always finish by drying completely at room temperature

Maintaining the PCM is much simpler. The phase-change material does not require water, either to function or to be cleaned.

• Hand wash only: wipe the surface with a slightly damp sponge, without detergent
• Dry with a clean, soft cloth
• Do not dry clean
• Do not machine wash
• Do not cut off the product label

The Jadecool provides hours of cooling through evaporation. You can reactivate it in just a few seconds with water. The PCM maintains a constant temperature of 21°C for several tens of minutes in intense heat: reliable and measurable thermal inertia.

Yes, by choosing the right technology. The Jadecool requires airflow for the fabric to evaporate heat. In confined spaces (full-face helmet, drysuit), use the PCM, which delivers dry cooling without ventilation.

No. The Jadecool is designed to wick away heat without leaving the skin damp. Once the neck gaiter is wrung out and shaken, the water remains trapped in the polyester fibers. PCM, on the other hand, works without any moisture.

For the Jadecool: wet it, wring it out, and shake it. It’s easy and takes 10 seconds with a water bottle. For the PCM: put it back in the freezer or alternate it with a replacement pack in a cooler.

No. Our cooling neck coolers are thermal protection devices designed to compensate for what the body can no longer regulate on its own in the face of extreme temperatures. They help prevent heatstroke and maintain alertness: it’s physics applied in the field, not medicine.